Alif Semiconductor /AE302F80F55D5AE_CM55_HE_View /I3C /I3C_INTR_SIGNAL_EN

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as I3C_INTR_SIGNAL_EN

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (TX_THLD_SIGNAL_EN)TX_THLD_SIGNAL_EN 0 (RX_THLD_SIGNAL_EN)RX_THLD_SIGNAL_EN 0 (IBI_THLD_SIGNAL_EN)IBI_THLD_SIGNAL_EN 0 (CMD_QUEUE_READY_SIGNAL_EN)CMD_QUEUE_READY_SIGNAL_EN 0 (RESP_READY_SIGNAL_EN)RESP_READY_SIGNAL_EN 0 (TRANSFER_ABORT_SIGNAL_EN)TRANSFER_ABORT_SIGNAL_EN 0 (CCC_UPDATED_SIGNAL_EN)CCC_UPDATED_SIGNAL_EN 0 (DYN_ADDR_ASSGN_SIGNAL_EN)DYN_ADDR_ASSGN_SIGNAL_EN 0 (TRANSFER_ERR_SIGNAL_EN)TRANSFER_ERR_SIGNAL_EN 0 (DEFSLV_SIGNAL_EN)DEFSLV_SIGNAL_EN 0 (READ_REQ_RECV_SIGNAL_EN)READ_REQ_RECV_SIGNAL_EN 0 (IBI_UPDATED_SIGNAL_EN)IBI_UPDATED_SIGNAL_EN 0 (BUSOWNER_UPDATED_SIGNAL_EN)BUSOWNER_UPDATED_SIGNAL_EN 0 (BUS_RESET_DONE_SIGNAL_EN)BUS_RESET_DONE_SIGNAL_EN

Description

Interrupt Signal Enable Register

Fields

TX_THLD_SIGNAL_EN

Transmit Buffer Threshold Signal Enable

RX_THLD_SIGNAL_EN

Receive Buffer Threshold Signal Enable

IBI_THLD_SIGNAL_EN

IBI Buffer Threshold Signal Enable This field is used in Master mode of operation.

CMD_QUEUE_READY_SIGNAL_EN

Command Queue Ready Signal Enable

RESP_READY_SIGNAL_EN

Response Queue Ready Signal Enable

TRANSFER_ABORT_SIGNAL_EN

Transfer Abort Signal Enable This field is used in Master mode of operation.

CCC_UPDATED_SIGNAL_EN

CCC Table Updated Signal Enable This field is used in Slave mode of operation.

DYN_ADDR_ASSGN_SIGNAL_EN

Dynamic Address Assigned Signal Enable This field is used in Slave mode of operation.

TRANSFER_ERR_SIGNAL_EN

Transfer Error Signal Enable

DEFSLV_SIGNAL_EN

Define Slave CCC Received Signal Enable

READ_REQ_RECV_SIGNAL_EN

Read Request Received Signal Enable This field is used in Slave mode of operation.

IBI_UPDATED_SIGNAL_EN

IBI Updated Signal Enable This field is used in Slave mode of operation.

BUSOWNER_UPDATED_SIGNAL_EN

Bus owner Updated Signal Enable

BUS_RESET_DONE_SIGNAL_EN

Bus Reset Pattern Generation Done Signal Enable This bit is used only in Master mode of operation.

Links

() ()